Originally Posted by figment
you dont need camber plates with the prokit
its easy, on the fronts just put a jack under the control arm and lower it slowly after you unbolt everything. it wont come flying out then. in the rears put a jack under the pumkin and unbolt the shocks and then lower the axel till the springs are free.
but for $75 i would let chad do them
Even using a jack under the fronts i still like to stand infront of the car in case a spring decides to shoot out. Also it really helps to have a motor in the car when you do it. It is a little dificult to install springs and struts in the front when the car has so little weight you can pick the front up by yourself.