Originally Posted by X-clusive
Well my plans are to get my new 6 puck clutch so i have no worries, since the stock g series tranny is slipping cuz of the power. After that i plan on upping the boost, putting the car on a healthy diet. Overall hopefully i can weigh 2000-2200lbs with me in it, and have 300whp. low to mid 12's by christmas if all goes well. Also am getting some gram lights and drag radials. Good luck on everyones build. []Deace
If you have the right pressure plate you need,I can give you info on where to dget a disc made.If you want sprung/unsprung kevlar/or bronze..Organic sucks for boost.Kevlar will hold,and bronze is the shit.But not if you have an aftermarket flywheel.
2 of my 7's now run a bronze unsprung disc 4 puck.
One car has a 1800 PSI pressure plate,that im thinking to upgrade to 3000 psi,then put the 1800.In my white first gen.I have a scatter sheild on my black first gen,that im thinking about tring to duplicate,for one of my other 7's.
Mongoose,
I now thing I can get them S5 TII wheels for you now.