im the one who wired it and believe me i made a checklist of every last thing that could have gone wrong wiring and the 2 white wires was the 1st thing to come to mind but that doesnt explain why no power is gettin to the ecu does it...it doesnt flash when u turn the ignition and im sure i did the pinning right..i followed the instructions to a T and went over it again. He was thinking of hardwiring the power wire from the ecu to the ignition and see if it is that... i guess eddie had lost the ecu wire from the SI harness, it was weird how he had it, it was like a 8 guage cable running from the fuse box straight to the 12v on the battery (should it have been that way)