Originally Posted by civicized
Bad master or slave cyl
Check for leading inside your car on firewall behind master. If nothing there, pry off the rubber boot covering the push rod between the slave and clucth arm. Betting you will see a load of nasty black fluid.
If dry at both cylinders and you have not been losing fluid from your revervoir, likely just needs to be bled at the slave cyl bleeder.
Seriously ? NO ! lol He has a mechanical Issue. There is something binding in the tranny, hed feel it in the pedal if it was the slave or master. I say bad clutch assy..
Originally Posted by Vonrobins
do u have a hydro tranny cause if u do u tranns is not bleeded all the way ,, happen to a couple friends of mines
Bleeded ? Lets try Bled, and you dont bleed a Tranny. You bleed a Clutch Slave Cylinder. I doubt thats his problem. Its only when the cars on IE Things are spinning. If the Engine is still engaged by a bad Clutch the tranny wont shift the synchros wont line up right. Whenits off everything is sitting still... Easy to line up a synchro ! Common sence and trouboe shooting point towards your Clutch assy. Time to get a new one ! If thats in good shape something in your tranny is bad ie. Shift Fork...