First off thank you for the response, I do have many fsms infront of me the main problem i'm having is the s14 fsm has many ground pins while on the s13 it says "sensor ground" on them so my question here is which grounds go were, the reason i ask is, i was pretty sure that the ground from each sensor has to be directly grounded to that circuit, correct me if i am mistaken. Secondly the tps on the s14 has 3 pins 27-THROTTLE POS SWITCH 49-TPS POWER SUPPLY 23-TPS. and on the s13 it only has 2
37-TPS POWER OUTPUT 20- TPS INPUT

Lastly pin 53-CRANKSHAFT POSITION SENSOR (CKP) OBD need to know were this relates on the s13 ecu

the grounds are as follows these all say "sensor ground"
s13
Pin number: 116, 13,21,6,197,108

on the S14 they all say "ECU ground"
Pin number: 118,112,106,19,10,56,43,39

I tried to find out as much as i could searching many different 240 forums but this is were i am stuck all help is appreciated