well, we just did a compression test on the motor... #1 cylinder was at around 60, #2 was a little over 100, #3 was at 50 and #4 was at 120. The spark plugs in the motor are 2 days old, the #4 plug looked brand new, the #3 plug has oil all over it and was pitch black as was the #1 plug, the #2 plug wasn't too bad.. I didn't drive on these plugs, just tried starting the motor... we removed the valve cover and there aren't any broken springs or retainers, so were guessing it's a valve or valve seal.. won't know until we take off the head, which is going to suck.. but, I was just wondering what everyone though... any help is greatly appreciated~!

-Mike