you guys hurt my head

the pickup truck tranny is NOT the same as the car tranny!

you can put a twin cam KA in, but its going to take alot of custom wiring! the intake manifold off the single cam truck motor does NOT bolt onto the twin cam

the twin cam 240sx manifold will NOT work in the truck! the truck is not multiport injection like the 240SX

and an SR?! try a custom oil pan, custom tranny mount and DAYS of wiring. that truck has a 1 piece harness. from headlight, to tailight, cluster to motor. all the same. no disconnects, no interfaces. so wiring an SR to work is such a PITA, i charge 1000.00 alone for wiring in those... ITS THAT BAD!!

as far as oil pans, if you use the SR pan youre SOL. youre either A) going to flex the front suspension enough to rotate the sway bar into the lower pan (which dents it which is BAD) or B) have to cock the motor back so far for the pan to clear the sway bar that no oil will sit around the pickup under acceleration.


the single cams in the trucks run just fine for some reason and Nissan Motorsports (NISMO) has an EXTENSIVE catalogue of parts for that motor. the nissan hardbody truck is a popular truck to turn into a road race car is one particular class.

my advice. just leave it alone.