OK I have a 90' GXL....I took out the mechanicle fan and replaced it with an electric one out of a 94' Camaro (biggest one with the most air flow i could fit ) and Im using a Flex-A-Lite adjustable fan relay (it goes into the inlet side of the radiator for temp and has an accessory wire for the a/c clutch to turn it on with the ac is on) any way when the a/c is on the motor is fine but when it kicks on from temp its to much of a load and kills the motor if im at ideal....
I know the RX-7 has an electric load idle control module in the computer and i want to splice into it so when the fan is on it reads load and bumps idle but i dont know where the computer is located and i can find the wire diamgram on Alldata but not the location