Originally Posted by na200whp
some info--
block was done by golden eagle. 1/2inch deck plate
(they do not weild on there plates instead they use some kinda compound between the block and plate and bolt them together.)
bore is 84.5mm with weisco/endyn pistons
crank eagle 95mm stroker crank with eagle 5.967" rods
the displacement of this block will be around 2.13 liter
i am currently have the w/p block off plate w/ electric pump but may go back to an oem pump before it makes it to the car.
Looks great. I dont know what compression you are running but a vacumn pump will work great to relieve some of the crankcase pressure. I cant wait to see you embarass some of the turbo guys. Luckily for me i dont have to worry.
Good luck with the rest of the build.
