alittle info...first off the dizzy..si dizzy's have tdc and crank angle sensors.they have 2 extra wires on it.they are blue/green and blue/yellow.blue/green goes to C1 and blue/yellow is C2..now the injectors..cut the wires at the 2 stock injectors..connect the 2 black/yellow wires together and run them to the yellow wire on the injector box.run the yellow wire to injector #1.run the red wire to injector #3.now run injector #2 to A3 and injector #4 to A7...the 4 red and/black injector wires go to the injector box.you must extend tps and eavc sencer wires..make sure you also switch the green/white and yellow/white wires on the tps plug..at the ecu cut wires at c1 and c2.connect the wire you cut from c1 to b10 and the wire you cut at c2 and run it over to b12..c1 and c2 are white and orange wires.....thats about it..