Thread: Hitting rev limiter at 3500...
View Single Post
Old Dec 26, 2004 | 02:46 PM
  #3 (permalink)  
Jaso0on's Avatar
Jaso0on
Is now ballin!
 
Joined: Oct 2003
Posts: 13,420
Likes: 0
Default
Originally posted by hondatyper
did you change the tach fluid? cuz that will make the ecu act retarded and give it a false reading. so the ecu thinks you're at redline and you're really not. I really have no idea
So frankie, isnt the tach fluid in the jug next to the Veetek sauce?

No, but i just went outside and pulled all of my plugs to see if any were fouled out, none were.. I do have a missing valve cover gromet in #4 so that one was filled with oil, so i get a turkey baster and suck it all out, took that plug out and let the rest of the oil drain down, put all the plugs back in and the wires back on, cranked it up and drove it down the street, making a few slow 7k pulls and then one 8k pull and it ran perfect all the way. wtf is goin on, but i am getting a CEL, and throwing a code 43, all the info i have on that code is "fuel system" anymore thoughts?

Edit: 4300th post!
__________________


RIP Kevin (Slo_Si) Gonzalez - 09/13/2006
Last edited by ~Jason~; Dec 26, 2004 at 03:42 PM.
Reply
0