Now let me inform you I do get accomidation, so I'm getting these pretty cheap. So Im just curious if you guys think that this would be a nice loud clean sound in my Audi. Mind you I already have Alpine Type R components front and rear, dont ask why I have components in the rear, I know they dont really make to much of a difference. But I got em cheap.

I also have the Infinity 7540A pushing the Alpine's. I plan on getting 2 Infinity Kappa Perfect 12's. Give me some input. Below I listed the specs of the amp's and subs.

Infinity 7540A:
Specifications
CEA Rated: Yes
Power Output: 111 watts RMS x 4 channel at 4 ohms and ≤ 1% THD + N 278 watts RMS x 2 channel at 4 ohms, 14.4V supply and ≤ 1% THD + N
Signal-to-Noise Ratio: 81dBA (reference 1 watt into 4 ohms)
Dynamic Power: 164 watts at 2 ohms
Effective Damping Factor: 6.315 at 4 ohms
Frequency Response (-3dB): 10Hz to 100kHz (-3dB)
Maximum Input Signal: 5.5V
Maximum Sensitivity: 230mV
Output Regulation: .088 dB at 4 ohms
MSRP U.S. $: $374.95

Infinity 1210A:
Specifications
CEA Rated: Yes
Signal-to-Noise Ratio: 72 dBA (reference 1 watt into 4 ohms)
Dynamic Power: 1516 watts at 2 ohms
Effective Damping Factor: 6.357 at 4 ohms
Frequency Response (–3dB): 17Hz to 302Hz (-3dB)
Maximum Input Signal: 5.7V
Maximum Sensitivity: 260mV
Output Regulation: .132 dB at 4 ohms
MSRP U.S. $: $574.95

Infinity Kappa Perfect 12.1
Specifications
MSRP U.S. $: 349.95
Power Handling, Peak: 1400W
Power Handling, RMS: 350W
Sensitivity: 96dB (In car)
Frequency Response (± 1.5dB): 18Hz - 150 Hz
Frequency Response (±3dB): 18Hz - 150Hz
Impedance: 4 Ohms
Mounting Depth: 6-1/2"

I would be getting the 1210A and the 2 12's for around $400 shipped.

Thanks,
Nate