Thread: stuck crank bolt
View Single Post
Old Nov 17, 2004 | 05:13 PM
  #5 (permalink)  
alternativeauto's Avatar
alternativeauto
Registered User
 
Joined: Feb 2003
Posts: 357
Likes: 0
Default
Does the inside of your crank pulley have a hex pattern, if so there is a tool to put in it to brace it. Then you can use a large cheater bar (I use a large jack handle) to break it loose.
Last edited by alternativeauto; Nov 17, 2004 at 05:23 PM.
Reply
0