Originally posted by Strokd85
Move the limited up to about 7k, you'll probably go through the traps lower than that (probably 6700 or so) which the motor should be able to handle without issue. First thing to go on a stock 302 will be the valve springs, you obviously don't have those on any more so I'd let it ride @ 7k.
Derek's right Scott, I had no idea you were limiting that thing to 6200. I promise you'll do less damage spinning it a little higher than you will running 400 feet on the rev limiter
Seriously, it will be fine, I've seen stock bottom ends spun to 7k and a little beyond on nitrous with no issues. What are you shifting it at?