Originally posted by "Someone"
Originally posted by letsrollagn
Like I told you j an ITR is 270 and you are running higher comp thus you should be above that hell mine is at 190. I told you when the block was bored to MAX spec you get blow-by w/out overbored rings. Your cylinders are probably out of round too. I will bring my crap to your house and check it when you get it apart. Then you can get the block bored over .5 and get oversized rings. No more smoke. End of story.
Not familiar with 2qk4us buildup but you make it sound as though he bored it out a bit to clean up the sleeves and then failed to use oversized rings eh?
Pretty simple way to tell just do a wet-test. Basically a compression test but you put add a little bit of oil to each cylinder to seal things up. If the compression numbers come back higher then youve found the culprit.
Have fun sounds like someone funked up during the build-up.
