TURBO on DA chassis(90-93 teg) is NOT easy! the front crossmember SUCKS! it leaves you NO room. If you use a small turbo(14b, t25) you might be able to fit it with the stock crossmember. but if your planning on running a t3/t4 with a equal length manifold it will NOT fit easily. the only company that makes kits for gen2 tegs is revhard...i think... I just puchased a z10 crossmember and traction bar setup for my TEG to make life easier. It makes sooooo much more room under there. I have fit a 16g(eclipse upgrade) with a SFP manifold on friends completely stock gen2 teg(b18a) without A/C but with the stock crossmember. it ran 14.6 on 6psi and 15.5 on 4 psi(using the SAFC hack)... 10 psi shoulda ran mid 13's untuned... even with a NON-driver behind the wheel...