I went down to sunshine wednesday and on my 3rd pass i pulled to about 5200-5400 rpms 1st and 2nd, and just got it into 3rd. i just let it coast to slow down. The car slowly died by the time i got to the last turn off. The car would start again, but had a really hard time keepin its idle. I got it towed home then did a compression test. Cyl #2 had no compression at all, but all the others where all within 10 psi of eachother. I originally thought i bent a valve cuz i got stock springs with ported e7's.i pull the valve cover today and the pushrod is just sticking out the side of the rocker . I was just wondering if anything else could have been damage from this?