Originally posted by sl0 t3g
did you replace the o-rings on the stock bearing you're supposed to reuse? if not, go to honda, replace those, and lube it up with some white lithium grease, and don't be afraid, too much is never enough when it comes to this.
Stock bearing?
There wasn't a bearing on my old shifter if it's what I'm thinking.
the new shifter came with 2 rubber rings to hold it centered in place.
the rubber piece that holds the shifter in place where the ball of the shifter is, is where the noise is coming from.
also where the shaft goes into the tranny there's a squeeking