FS: 350Z 6-speed tranny from 2006, post-recal rev CD09!
I've got this great 2006 350Z 6-speed tranny with less than 10k miles on it, and I've determined that I won't get a chance to use it. This is a post-recall trans. The first few versions up to CD05 were all recalled. If you see one on a forum for $1-200 this is probably one of them. Nissan and Infinity literally were throwing the early ones in the dumpster. The CD number is printed on a sticker and pasted on the bellhousing. This is a CD09 trans that is well beyond the last recall version. I have with it the shifter, mount, crossmember, throwout bearing/sleeve/arm, slave cylinder, sensors... This thing is complete! First $750 obo can takes it. Pick up available in Pinellas Park. Delivery not available because it weighs more than I can lift (comfortably) by myself.
STi brakes are gone. Longfellow has them.
I should also mention that Mazworx can take the 350Z bell housing and machine it to bolt directly to an SR20 and work with an SR20 clutch and starter. The s13/s14 mount bolts on. You're just a shifter and driveshaft away from a baller setup!!
I should also mention that Mazworx can take the 350Z bell housing and machine it to bolt directly to an SR20 and work with an SR20 clutch and starter. The s13/s14 mount bolts on. You're just a shifter and driveshaft away from a baller setup!!
No, it has under 10k on it. It was pulled from front end wrecked 2006 350z enthusiest edition.
This is a steal, some of the older models still go for over $1k
This is a steal, some of the older models still go for over $1k
STi brakes are gone. Longfellow has them.
I should also mention that Mazworx can take the 350Z bell housing and machine it to bolt directly to an SR20 and work with an SR20 clutch and starter. The s13/s14 mount bolts on. You're just a shifter and driveshaft away from a baller setup!!
I should also mention that Mazworx can take the 350Z bell housing and machine it to bolt directly to an SR20 and work with an SR20 clutch and starter. The s13/s14 mount bolts on. You're just a shifter and driveshaft away from a baller setup!!
wow you you don't even have to buy that adapter like the z32 tranny?
bump
__________________
Wanna see picsfrom carevents in Japan?
http://www.hashiriya.net
R.I.P - Tim Aldrich (Osama Tim Laden)
http://www.hashiriya.net
R.I.P - Tim Aldrich (Osama Tim Laden)


