FS: t2 shell and all engine stuffs w/ turbo
Rotors per stamped B = $150 a peice
Housings = $100 for both (only works on a 12a or rx2 or 3 or truck)
Irons = $150 a peice
T2 shell with great brakes and 17" rims with new tires s5 tails = $700
UIM=50
LIM=50
Turbo t04 htrim hybrid = $300 with manifold and dp ported wg
Race exhaust port stencil = $15
Bridge port stencil = $20
Stock injectors and rails = $45
T2 wiring harness = $80
intercooler, modified w/ hoses = $50
RA apex seals and springs, barely used for 10 seconds = $100
Oil rings and seals with springs $30 for whole set
Side seals with springs = $30 whole set
Jacobs electronics Spark controller (same as MSD 6a) $100
Shifter stock = 15
Turbo transmission good working no problems = 200
Eccentric shaft = $30
Drive shaft = $50
BOV with custom made flange stage 3 = $65
Flywheel, just had it shaved = $50
Stage 6 3 puck clutch with stage 2 mazdaspeed pp = $100
please pm me for pics, with your email or aim me at pfcmpguy84
thanx
everything is in the new port richey area
Housings = $100 for both (only works on a 12a or rx2 or 3 or truck)
Irons = $150 a peice
T2 shell with great brakes and 17" rims with new tires s5 tails = $700
UIM=50
LIM=50
Turbo t04 htrim hybrid = $300 with manifold and dp ported wg
Race exhaust port stencil = $15
Bridge port stencil = $20
Stock injectors and rails = $45
T2 wiring harness = $80
intercooler, modified w/ hoses = $50
RA apex seals and springs, barely used for 10 seconds = $100
Oil rings and seals with springs $30 for whole set
Side seals with springs = $30 whole set
Jacobs electronics Spark controller (same as MSD 6a) $100
Shifter stock = 15
Turbo transmission good working no problems = 200
Eccentric shaft = $30
Drive shaft = $50
BOV with custom made flange stage 3 = $65
Flywheel, just had it shaved = $50
Stage 6 3 puck clutch with stage 2 mazdaspeed pp = $100
please pm me for pics, with your email or aim me at pfcmpguy84
thanx
everything is in the new port richey area
$600 for shell with rims, im so losing out, $110 per rotor, $110 per iron, $100 for pair of housings in good condition ported (gxl se only) Turbo w/o mani or dp (250) w/ mani and dp (300) Jacobs electronics spark controller (pretty much msd 6a) $85, everything else same price. buy me now. im desperate to get this out
its a stock hybrid, stock hot side with a to4h trim cold side. The dp will fit a regular turbo same with the manfiold, i have a 2.5" dp, idk who makes it, i got it for like $80 and used it for less than a year, 02 sensor is still like new.


