As I said, this is a 'tweaked' Spearco FMIC. Bar and plate.


Overall length 30", height 8", and core is 3.5" thick. This is good for 600hp. Used on an old turbo 350z project I had, but got wrecked and the IC was "tweaked" in the process.

It has been pressure tested to 32psi no leaks! I set this thing in a garbage can full of water, filled with CFM until the pressure test couplers nearly popped off, no leaks that I could see!

Looking for $150 or trade for some low comp (8.5:1 or 9:1) GSR stock bore pistons, or Skunk2 or Edelbrock GSR intake mani.

Located south of Tampa. Willing to meet part way.

for reference, check with mtber!

 

ttt

 

to the top

 

To the top!

 

to the top, bishes. someone's gotta want this thing.....it may not be pretty, but it'll make horsepower!

 

ttt

 

back up

 

to much money for that thing as soon as you go to straighten it up that's when all hell breaks loos

 

doesn't need to be straightened, it holds pressure just fine now.

if you're interested, shoot me an offer. It's a 600hp capable IC that sells for about $600 new.