wtd d series/zc
Thread Starter
Registered User
Joined: Aug 2005
Posts: 1,511
Likes: 0
wtd d series/zc
i need
d16 forged rods
d16 forged turbo pistons (not to low though) can be up to .020 over
dohc zc cam gears (adjustable)
block guard for d series
aftermarket underdrive pully for a dohc zc
i know most of this is a long shot but i figured i would throw it up there.
d16 forged rods
d16 forged turbo pistons (not to low though) can be up to .020 over
dohc zc cam gears (adjustable)
block guard for d series
aftermarket underdrive pully for a dohc zc
i know most of this is a long shot but i figured i would throw it up there.
Chuck aka Woody
Joined: Jul 2004
Posts: 4,279
Likes: 0
i have a couple sets of pistons for ya.
in your motor, they will be 7.9-1 or 7.2-1 .
they are oem honda though!
as for the adj. cam gears, it will prob be alot easier to find D16a1 40 tooth gears,
rather than the 34 tooth ZC gears. just make sure that you use a 20 tooth crank
sprocket with them rather than the 17 tooth ZC crank sprocket!!!!!!!!!!
also with the D16a1 gears, you can use the stock D16a1 timimg belt!
in your motor, they will be 7.9-1 or 7.2-1 .
they are oem honda though!
as for the adj. cam gears, it will prob be alot easier to find D16a1 40 tooth gears,
rather than the 34 tooth ZC gears. just make sure that you use a 20 tooth crank
sprocket with them rather than the 17 tooth ZC crank sprocket!!!!!!!!!!
also with the D16a1 gears, you can use the stock D16a1 timimg belt!
__________________
NO EXCUSES for my lil FWD! Cmon RWD's n AWD's, lets DIG!
STEISS RACING all the way
HONDA ENGINES from oem to EXTREEM
www.myspace.com/streetracin_cwby
http://www.facebook.com/#!/profile.php?id=1433200141
NO EXCUSES for my lil FWD! Cmon RWD's n AWD's, lets DIG!
STEISS RACING all the way
HONDA ENGINES from oem to EXTREEM
www.myspace.com/streetracin_cwby
http://www.facebook.com/#!/profile.php?id=1433200141
Last edited by ugly86integra; Dec 24, 2006 at 04:30 AM.
Thread Starter
Registered User
Joined: Aug 2005
Posts: 1,511
Likes: 0
i have a couple sets of pistons for ya.
in your motor, they will be 7.9-1 or 7.2-1 .
they are oem honda though!
as for the adj. cam gears, it will prob be alot easier to find D16a1 40 tooth gears,
rather than the 34 tooth ZC gears. just make sure that you use a 20 tooth crank
sprocket with them rather than the 17 tooth ZC crank sprocket!!!!!!!!!!
also with the D16a1 gears, you can use the stock D16a1 timimg belt!
in your motor, they will be 7.9-1 or 7.2-1 .
they are oem honda though!
as for the adj. cam gears, it will prob be alot easier to find D16a1 40 tooth gears,
rather than the 34 tooth ZC gears. just make sure that you use a 20 tooth crank
sprocket with them rather than the 17 tooth ZC crank sprocket!!!!!!!!!!
also with the D16a1 gears, you can use the stock D16a1 timimg belt!
thanks but no thanks i need forged..... and the d16a1 gears are retarded when you put zc cams on them........b series gears will work but i was just seeing if some one happened to have a set for a zc....
