F/s: Complete ITR longblock, headwork, etc. *pics*
Thread Starter
Is now ballin!
Joined: Oct 2003
Posts: 13,420
Likes: 0
F/s: Complete ITR longblock, headwork, etc. *pics*
PICS FIXED
Need the money for more important things, getting out of the scene, the motor is 99.9% complete, it just needs rod&main bearings, and to be assembled. Looking to get $1200obo Pics and specs below:
2001 USDM ITR shortblock w/girdle, coated in high temp silver - 40k miles
Block was hot tanked and honed - 0 miles
Block surface has been decked .5 thousandths - 0 miles
FRESH micropolished & balanced p73 ITR crank w/crank pulley - 0 miles
OEM ITR pistons mounted on rods w/rings and wrist pins - 40k miles
Brand new OEM ITR oil pump - 0 miles
OEM ITR oil pan
OEM ITR flywheel - 40k miles
2001 USDM ITR head w/cams, intake manifold, distributer, vtec soleniod (100% complete) - 40k miles
Head is shaved .30 thousandths - 0 miles
Minor port job with cleanup of head - 0 miles
3 angle valve job - 0 miles
OEM red ITR valve cover w/spark plug cover
The only thing it needs to be 100% complete are rod and main bearings..
Motor came from my friends ITR, I bought it in need of a rebuild with plans to make a sweet all motor setup, which I almost finished but now I need money for other things (lawyer, as most of you know), and now onto the pics, sorry for the quality as they were taken on the camera phone
There it is folks, I'll try to get some better pics, but my camera is broken so I gotta use a camera phone!
Need the money for more important things, getting out of the scene, the motor is 99.9% complete, it just needs rod&main bearings, and to be assembled. Looking to get $1200obo Pics and specs below:
2001 USDM ITR shortblock w/girdle, coated in high temp silver - 40k miles
Block was hot tanked and honed - 0 miles
Block surface has been decked .5 thousandths - 0 miles
FRESH micropolished & balanced p73 ITR crank w/crank pulley - 0 miles
OEM ITR pistons mounted on rods w/rings and wrist pins - 40k miles
Brand new OEM ITR oil pump - 0 miles
OEM ITR oil pan
OEM ITR flywheel - 40k miles
2001 USDM ITR head w/cams, intake manifold, distributer, vtec soleniod (100% complete) - 40k miles
Head is shaved .30 thousandths - 0 miles
Minor port job with cleanup of head - 0 miles
3 angle valve job - 0 miles
OEM red ITR valve cover w/spark plug cover
The only thing it needs to be 100% complete are rod and main bearings..
Motor came from my friends ITR, I bought it in need of a rebuild with plans to make a sweet all motor setup, which I almost finished but now I need money for other things (lawyer, as most of you know), and now onto the pics, sorry for the quality as they were taken on the camera phone
There it is folks, I'll try to get some better pics, but my camera is broken so I gotta use a camera phone!
Last edited by Jaso0on; Dec 17, 2005 at 08:42 AM.
Thread Starter
Is now ballin!
Joined: Oct 2003
Posts: 13,420
Likes: 0
Equal Opportunity Hater
Joined: Apr 2003
Posts: 2,492
Likes: 0
Make sure you are standing the crank on its circular base when you are not taking pics.
Bump for joo mang.
Bump for joo mang.
__________________
JDM Hater #001 PITBULL, "the most diabolical JDM/all around HATER"
It's not that the JDM itself is bad. When everything is JDM, When you think you're JDM, When your US car is JDM cause of your taillights. When YOU are JDM. YOU are GAY!
JDM Hater #001 PITBULL, "the most diabolical JDM/all around HATER"
It's not that the JDM itself is bad. When everything is JDM, When you think you're JDM, When your US car is JDM cause of your taillights. When YOU are JDM. YOU are GAY!
Thread Starter
Is now ballin!
Joined: Oct 2003
Posts: 13,420
Likes: 0
Rockin' 4 more Cylinders
Joined: Apr 2004
Posts: 11,897
Likes: 0
does the head come with soem kind of cams , valve trane etc?
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
Thread Starter
Is now ballin!
Joined: Oct 2003
Posts: 13,420
Likes: 0
Rockin' 4 more Cylinders
Joined: Apr 2004
Posts: 11,897
Likes: 0
Originally Posted by Jaso0on
Head is 100% complete with ITR cams, ITR intake manifold, full valvetrain, distributer, vtec solenoid, etc.
well fuck , i might have to get that from you ...thats a awsome deal
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
