I have a buddy that is looking for a NICE undamaged GT nose plastics and front fender extentions.
Tommy 813-363-2176

 

Tommy,
You will need to know what fenders he has because 91 92 and 93 are different than 87-90 due to the fender openings being larger on the 91-93 because of the 16" pony wheel.

Mark

 

Is this for the extension application or the nose also? Thanks Mark
Oh its on an 90 but do you have a measurement on the wheel opening to verify they havent already been swapped out?

 

I have a new aftermarket front cover I ordered for a customer that never paid $100, I also have the front spats used-free if you buy the cover. 813-770-9650

 

I dont have a measurement.I can tell by looking at them.
Look for the vin tags on the fender lip and see if they are there and if you can read the vin to match it to the car.
Or if you have a filler panel of either year try and fit it to the fender.

Mark

 

there not there anymore

 

The front leading edge of the fender where it mounts to the buper cover is the same.If you look at the opposite side where the filler panel would mount it the opening gradually gets narrower I would say by about 1 inch the closer you get to the bottom of the fender opening.The early fender is a little more squared off in that area where as the later fender looks like the corner is cut off if any of this makes sense.It is the area where that little panel mounts that is different in size.the rest of the opening is the same.they changed that area so when you turn the wheels lock to lock it doesnt rub that panel with the larger 16" wheel.If you have ever put ponies on the 87-90 cars and they rub that is what ford designed for.

Mark