Testing Waters...
Im thinkin about selling my 95 Cobra...
Car is a tripple black 1995 Cobra 5.0L it has 118k original miles.
Engine:
Bottem end is stock.
Trickflow track heat heads.Fully ported and polished.
All new valve train ( less than 200 miles) stainless swirl polished ferra 2.02 and 1.60 valves.
New Crane 2031 cam.
Scorpion 1.72 roller rockers.
Cometic headgaskets.
New Hi-flow ford motorsports water pump,
New Cap, rotor, wires, plugs.
New Thermostat,
All new gaskets, Intake, plenum, throttlebody, timing cover ect..
New Cloyes double roller timing chain and gears.
Steeda 4core aluminum radiator.
Drivetrain: G-Force transmission ( less than 500 miles)
New Spec stage 3 clutch,New pressure plate t/o bearing.
Lakewood blow-proof bellhousing.
Lakewood clutch arm.
Freshly rebuilt rearend.
4:10 ford motorsport gears.
T/A rearend girdle.
Suspension:
Lakewood 90/10 front struts.
Eibach Drag springs up front.
Moroso Trick springs in rear.
Lakewood 50/50 shocks in rear.
Steeda double adjustable upper rear control arms.
Mac lower rear control arms.
Kenny brown subframe connectors.
Tires/Wheels.
Right now i have 2 sets of wheels and tires for the car.
First set is 17x9 original Cobra R wheels up front. 17x10 original cobra R wheels out back.
15x4 Weld prostars up front with brand new tires.
15x8 Weld prostars in rear with 28x11 Goodyear slicks.
Im sure there is other stuff im forgetting right now, If you have any questions just ask.
NADA has my car valued at aroun 9500$ bone stock, with over 6$ in motor and transmission in the past 6months. Im asking 10,500$
I will have some pics up soon. You can call me at 813-376-0602 or Email me at Villageidiott28@yahoo.com
Thanks,
Cody
Car is a tripple black 1995 Cobra 5.0L it has 118k original miles.
Engine:
Bottem end is stock.
Trickflow track heat heads.Fully ported and polished.
All new valve train ( less than 200 miles) stainless swirl polished ferra 2.02 and 1.60 valves.
New Crane 2031 cam.
Scorpion 1.72 roller rockers.
Cometic headgaskets.
New Hi-flow ford motorsports water pump,
New Cap, rotor, wires, plugs.
New Thermostat,
All new gaskets, Intake, plenum, throttlebody, timing cover ect..
New Cloyes double roller timing chain and gears.
Steeda 4core aluminum radiator.
Drivetrain: G-Force transmission ( less than 500 miles)
New Spec stage 3 clutch,New pressure plate t/o bearing.
Lakewood blow-proof bellhousing.
Lakewood clutch arm.
Freshly rebuilt rearend.
4:10 ford motorsport gears.
T/A rearend girdle.
Suspension:
Lakewood 90/10 front struts.
Eibach Drag springs up front.
Moroso Trick springs in rear.
Lakewood 50/50 shocks in rear.
Steeda double adjustable upper rear control arms.
Mac lower rear control arms.
Kenny brown subframe connectors.
Tires/Wheels.
Right now i have 2 sets of wheels and tires for the car.
First set is 17x9 original Cobra R wheels up front. 17x10 original cobra R wheels out back.
15x4 Weld prostars up front with brand new tires.
15x8 Weld prostars in rear with 28x11 Goodyear slicks.
Im sure there is other stuff im forgetting right now, If you have any questions just ask.
NADA has my car valued at aroun 9500$ bone stock, with over 6$ in motor and transmission in the past 6months. Im asking 10,500$
I will have some pics up soon. You can call me at 813-376-0602 or Email me at Villageidiott28@yahoo.com
Thanks,
Cody
__________________

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...
Originally Posted by a98ss
best time 12.71@122mph.... ?
__________________
RIP Kevin Slo_Si
You will be missed brother
RIP Kevin Slo_Si
You will be missed brother
what in blue hell are you doing?
if i had $10,500 i would buy it in a heart beat, but i bet i could make it hook-up from a dig
you looking to start another project or just tired of pumping money into the pit?
__________________
03 Gt - SOLD!
88 LX Coupe - 308 with a few mods...
03 Gt - SOLD!
88 LX Coupe - 308 with a few mods...
Well actually Mo, the best time was a 12.36@114 on the motor. I ran a 12.71@122 with a 2.4 60ft.. on a 60shot (before all the suspension mods.)
And Im not dead set on selling it, im just testing to see if any1 is interested.... If the right person comes along i wil get rid of it... I just have to much going on right now, to have fun with the car stuff anymore...
-Cody
And Im not dead set on selling it, im just testing to see if any1 is interested.... If the right person comes along i wil get rid of it... I just have to much going on right now, to have fun with the car stuff anymore...
-Cody
__________________

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...
Stock suspension 275 nittos with a 2.3 60ft N/A the car did a 12.82@117...
Stock suspension 275 nittos with a 2.4 60ft 60shot the car did a 12.71@122..
After suspension mods
slicks with a shitty 1.8 60ft N/A the car did a 12.36@114... But the car was runnin on 7cylinders when i hit 3rd gear...
So, Yes i need more seat time, Iv never had to take off from an idle lol. its hard not to just punch it... But im sure the car is capable of low 11s the way it sits now...
Ohh and bump for the night...
Stock suspension 275 nittos with a 2.4 60ft 60shot the car did a 12.71@122..
After suspension mods
slicks with a shitty 1.8 60ft N/A the car did a 12.36@114... But the car was runnin on 7cylinders when i hit 3rd gear...
So, Yes i need more seat time, Iv never had to take off from an idle lol. its hard not to just punch it... But im sure the car is capable of low 11s the way it sits now...
Ohh and bump for the night...
__________________

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...



