Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

wierd spark issue

Thread Tools
 
Old Mar 30, 2010 | 12:53 PM
  #1 (permalink)  
1337240sx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2009
Posts: 367
Likes: 0
Default wierd spark issue

car ran fine last night(had empire over) for 10 minutes.
would be rev happy.
at the 10 minute mark cyl 4 losses spark.(like clockwork)
at the 11 minute mark cyl 3 losses spark and car dies.
waited 10 minutes.
car started perfect would idle (wouldnt really rev without a backfire or 2 thinking the o2 is bad...) but it would rev.
10 minutes on the clock losses cyl 4...
11 min cyl 3...
did it 4 times in a row.
today i tryed to start it at about 1shared_pm. started but couldnt get it to rev well atall.(had to floor it to get it to move 10 feet... and even at that i barly got it to move)
empire and i went threw the book and tested everything. nothing looks out of order atall.
__________________
Originally Posted by Empire oh no. another ass hole 240...
Reply
Old Mar 30, 2010 | 07:49 PM
  #2 (permalink)  
A-ron's Avatar
(SHIFT-YOUR SHITS WEAK)
 
Joined: Nov 2006
Posts: 2,356
Likes: 0
Default

coil pack
__________________
Drifting:
most fun you can have
with your pants on.


Reply
Old Mar 31, 2010 | 10:03 AM
  #3 (permalink)  
1337240sx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2009
Posts: 367
Likes: 0
Default

how would it be coil if it is always cyl 4 and only cyl 4??? then a minute later cyl 3 starts to miss a fire ever other fire...
__________________
Originally Posted by Empire oh no. another ass hole 240...
Reply
Old Mar 31, 2010 | 03:45 PM
  #4 (permalink)  
A-ron's Avatar
(SHIFT-YOUR SHITS WEAK)
 
Joined: Nov 2006
Posts: 2,356
Likes: 0
Default

well start with the basics change out
spark plugs
wires
__________________
Drifting:
most fun you can have
with your pants on.


Reply
Old Mar 31, 2010 | 05:23 PM
  #5 (permalink)  
1337240sx's Avatar
Thread Starter
Registered User
 
Joined: Apr 2009
Posts: 367
Likes: 0
Default

done and done... i have covered the basics weeks ago... i have done everything but replace the motor...
empire came over and did the same thing...
its at a repair shop now. there saying the distrib is bad(my dad brought it there and is paying for it to be fixed before i can get it back to work on it some more)
__________________
Originally Posted by Empire oh no. another ass hole 240...
Reply
Old Mar 31, 2010 | 09:47 PM
  #6 (permalink)  
Super Coupe's Avatar
Old school TR member
 
Joined: Apr 2003
Posts: 5,861
Likes: 0
Default

Thinking it is the distributor. Its obviously spark related.

Assuming you replaced the ecu? Checked all wires?
__________________
Reply
Old Apr 2, 2010 | 08:03 PM
  #7 (permalink)  
Empire's Avatar
buildin' it
 
Joined: Aug 2006
Posts: 4,565
Likes: 0
Default

any update?
Reply
Old Apr 2, 2010 | 08:13 PM
  #8 (permalink)  
ZenkiLB's Avatar
Finally out of 240 scene!
 
Joined: May 2009
Posts: 808
Likes: 0
Default

how much does that shop charge to replace the distributor?
__________________
No more POS 240's
Reply
Old Apr 3, 2010 | 07:00 AM
  #9 (permalink)  
180SX's Avatar
Registered User
 
Joined: Mar 2001
Posts: 1,060
Likes: 0
Default

if you are dropping a cyl after warm up, it is actually the pickup plate in the dist. There is a 720 fine tooth plate that runs through a optical pickup inside the dist... just like a cam sensor on a SR. This is happening on a lot of SRs / KAs with age.


martin
__________________
Custom Nissan Motor Builds. Inquire By PM.
Reply




All times are GMT -8. The time now is 09:28 PM.