Tampa Racing

Tampa Racing (https://www.tamparacing.com/forums/)
-   Nissan/Infiniti Tech (https://www.tamparacing.com/forums/nissan-infiniti-tech/)
-   -   craigs list r32 gt-4 anyone know the car or bs (https://www.tamparacing.com/forums/nissan-infiniti-tech/551609-craigs-list-r32-gt-4-anyone-know-car-bs.html)

jizmogloben 02-25-2009 04:05 PM

craigs list r32 gt-4 anyone know the car or bs
 
Nissan Skyline R32 GT-4 For Sale

RobRobking18 02-25-2009 04:13 PM

old...

4wheeldriftS13 02-25-2009 04:13 PM

as far as I know RB20 was only produced Rear wheel Drive. R32 GTS-T.. I wave b/s flag. up there with retards claiming RB pistons in SR20's at car meets.

ThaiRacer 02-25-2009 04:40 PM


Originally Posted by 4wheeldriftS13 (Post 6352716)
as far as I know RB20 was only produced Rear wheel Drive. R32 GTS-T.. I wave b/s flag. up there with retards claiming RB pistons in SR20's at car meets.

Its a R32 GTS-4 its AWD

Epstein 02-25-2009 04:44 PM

Yes, they made 2.0L AWD versions of the R32. They also made a type-m with active aero!

BTW, You can put VG pistons into SR20's. Don't know about RB's, though. Wouldn't doubt it, but wouldn't know why you'd want to either.

4wheeldriftS13 02-25-2009 05:03 PM

Wouldn't they be smaller?? Inline 6 are smaller..not sure about the VG...V6
Thats interesting about the RB20-AWD. Did searches before posting. Didnt know they had a type-m R32 either. Thought that was only R33

elitist 02-25-2009 06:40 PM

yea r32 gts-4 is awd but still gay cuz its not a GTR, it still has small fenders F&R, gay interior, etc. Definiely not worth $18k, I can get a GTR already here, titled, etc for a good bit less than that. Car probably worth like $13k max

Ph34r 02-25-2009 07:00 PM


keywords: Mazda RX7 RX8 SC300 Lexus 350Z 240SX Civic Integra
...

nismokid 02-25-2009 07:38 PM

That was my old R32. Man I cant belive its up for sale again.

Epstein 02-26-2009 03:06 AM


Originally Posted by 4wheeldriftS13 (Post 6352909)
Wouldn't they be smaller?? Inline 6 are smaller..not sure about the VG...V6

RB's run tiny strokes. The RB25 and RB26 (and RB30) engines run 86mm pistons, which I'm sure have similar compression height and pin dimensions. Never seen it done, though. The VG30 uses an 87mm piston, which will fit a 40-over SR. This was very common on FWD's, to use VG-DET pistons to get a lower compression for turbo.


All times are GMT -8. The time now is 08:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands