200Watt MTX AMP pics.
MTX RT2200 amp
RMS Power measured at 12.5 Volts DC:
50 Watts x 2 into a 4 Ohm load with less than .5% THD
100 Watts x 2 into a 2 Ohm load with less than 1% THD
200 Watts bridged into a 4 Ohm load with less than 1% THD
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC:
85 Watts x 2 into a 4 Ohm load
140 Watts x 2 into a 2 Ohm load
280 Watts bridged into a 4 Ohm load
Signal to Noise Ratio:
100dB A-Weighted (Referenced to Rated PWR at 1VRMS Input Sensitivity)
Damping Factor: >200
Frequency Response: 20-20,000 Hz ±.25dB
Bass Boost: Variable Boost centered at 40Hz (0 to 18dB)
Defeatable 18 dB/octave crossover at 85 Hz, selectable for high pass, low pass, or full range.
Dimensions:
7" x 9" x 2" (17.8cm x 22.8cm x 5cm) (not including mounting feet)
8-1/4" x 9" x 2" (20.9cm x 22.8cm x 5cm) (including mounting feet)
Works great, like new. Retails for over $200
$75
RMS Power measured at 12.5 Volts DC:
50 Watts x 2 into a 4 Ohm load with less than .5% THD
100 Watts x 2 into a 2 Ohm load with less than 1% THD
200 Watts bridged into a 4 Ohm load with less than 1% THD
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC:
85 Watts x 2 into a 4 Ohm load
140 Watts x 2 into a 2 Ohm load
280 Watts bridged into a 4 Ohm load
Signal to Noise Ratio:
100dB A-Weighted (Referenced to Rated PWR at 1VRMS Input Sensitivity)
Damping Factor: >200
Frequency Response: 20-20,000 Hz ±.25dB
Bass Boost: Variable Boost centered at 40Hz (0 to 18dB)
Defeatable 18 dB/octave crossover at 85 Hz, selectable for high pass, low pass, or full range.
Dimensions:
7" x 9" x 2" (17.8cm x 22.8cm x 5cm) (not including mounting feet)
8-1/4" x 9" x 2" (20.9cm x 22.8cm x 5cm) (including mounting feet)
Works great, like new. Retails for over $200
$75
__________________
-Tony Moore (Moorespeed12@yahoo.com)
-Tony Moore (Moorespeed12@yahoo.com)
willing to trade for an apline mrv-f301?
it's 50wx4 @ 4 ohms
70wx4 @ 2 ohms
280wx2 @ 4 ohms
good condition, only selling it because the input sensitivity is less than 4 volts and i have a 4volt head unit......
it's 50wx4 @ 4 ohms
70wx4 @ 2 ohms
280wx2 @ 4 ohms
good condition, only selling it because the input sensitivity is less than 4 volts and i have a 4volt head unit......
__________________
she said they call 15% blowjob tint for a reason
she said they call 15% blowjob tint for a reason


