hey, my pads felt like they were wearing down(to the point were the pedal hits the floor, and barely slows the car down.) so i changed my pads and bled them they worked good for a day or 2, then i let my car sit for 2 days and now the pedal does nothing. i push it to the floor and it doesnt even slow it down a bit. anyone that can help me, pm me or text 813 679 1441. i will pay

 

you either have air in the lines. your master is going out. or when you did the brakes you messed up the pinion in the caliper. more then likely theres still air in the lines.

 

the only one that has air in the lines is the passenger front. but it seems like there is soo much air that bleeding it isnt enough i was pumping it for like 10 minutes and it was strate air coming out. all the other 3 were airless. wouldnt the 3 brakes work then that one wouldnt or would it screw up the whole thing

 

Do you have your calipers upside down sounds funny but Iv seen it happen. Air bleeder facing up on the caliper

 

my guess is the master cylinder is bad. even if your pads wear all the way down your pedal will stay at the same height.

 

but it was wierd bc i put new pads on and it worked perfectly for about 2 days

 

Yeah what pat said cuz we go to school

 

dammit

 

If you still need help I would PM Pat