integra fans won't work!need help please!
Thread Starter
Registered User
Joined: Jun 2007
Posts: 14
Likes: 0
integra fans won't work!need help please!
i have a 96 integra with a b18a1 block in it. after doing the swap the ac and radator fans do not come on. i jump it and the fans come on but when i plug it back in the fans dont work.help please!
Registered User
Joined: Nov 2008
Posts: 32
Likes: 0
i had the same problem in my CRX. Heres what you can try take some wire and connect it to the fan and than connect to other ends to a positive and a ground. if the fan kicks on than you have a bad connector. If it doesn't than the fans motor has gone bad. Hope this helps
90% grind 10% sleep
Joined: Nov 2002
Posts: 6,963
Likes: 0
move the thermostat ground over to another spot.
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
Registered User
Joined: May 2004
Posts: 3,478
Likes: 0
unplug the 2-wire connecter thats on the thermostat housing and with the key on jump the wires and see if the fan comes on. do that AFTER checking the fuse and relay in the under-hood box.
__________________
"Black people can't be racist" - Some black guy.
"Black people can't be racist" - Some black guy.
