Key stuck and wont come out
Now this is pretty easy, but then again i love electrical. But all you need to do is connect 5 wires total. One of the plugs that you disconnected from the auto shifter is a 14P plug. Cut the plug off. Your going to have a 2 thick blk wires and 1 blk/blu wire, Solder those 3 together. Those together lets your car think its in park and releases the key and starts your car. Important
Next there is a yel/red wire and a grn/blk wire. Doesnt matter what way they go they do the same. These are for your reverse lights. Connect some line to them and run it through the firewall to your reverse light switch. And your set.
credit for this goes to Luserkid on honda-tech.com
http://www.honda-tech.com/showthread.php?t=1337459
also, if you want i can do this for you send me a PM and we can take care of this in 5 minutes tonight
Next there is a yel/red wire and a grn/blk wire. Doesnt matter what way they go they do the same. These are for your reverse lights. Connect some line to them and run it through the firewall to your reverse light switch. And your set.
credit for this goes to Luserkid on honda-tech.com
http://www.honda-tech.com/showthread.php?t=1337459
also, if you want i can do this for you send me a PM and we can take care of this in 5 minutes tonight
__________________
ಠ_ಠ Haters gonna hate ಠ_ಠ
ಠ_ಠ Haters gonna hate ಠ_ಠ
^ Good Job Hotsauce91 and good info from Invader Jim
__________________

Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301

Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301


