SOHC people! ever put a y8 mani on a z6?
 

just picked up a y8 manifold today and i know that you can mount it on a z6 no problem BUT is there a DIY anywhere? The 3 or 4 I have found are "page cannot be displayed" or the pictures are little red X's, or just not detailed enough.


if anybody has done this swap over before i had a few ?'s:

1. do you need a y8 fuel rail?
2. i wanted to get a bigger tb, since the z6 is only a 56mm i wanted to upgrade to a b series one 60mm , anybody know of a certain tb that the holes line up?

rep will be given and answers will be much appreciated.

thanks.

Slocivic

DIY D16Y8 intake manifold onto D16Z6 write-up how-to LOTS OF PICS!!! - Honda-Tech

The pics are gone from the link but the step by step is their.

Any throttle body for an H series B series or D series are interchangeable, with one catch; you need to pay attention to where your IACV (idle air control valve).

Also make sure when you add the larger throttle body that you port match

much appreciated, thank you.

when i put mine on ill do it with pics, and make a write up