alright speedometer isn't moving. My friend told me it could be my speed sensor. how do i install the speed sensor?

theres two bolts on it, i remove em and i twist off the speed sensor. how do i put it back on correctly?

 

Twist it in, install bolts, plug in sensor.

.

 

well said.. +1 lmao

 

Is it electrical or cable?...-Bob

 

yup its easy its right on the tranny

 

Lucky break. Electrical sensor.Remove old one, put the new one in it's place.-------------------------------On some cars, there is a short metal pin that fits into the tranny.grease it well and the friction of the grease will hold the pin in place, so you don't drop it as it goes back in.Some cars have a small gear (grease it well) and it will rotate as it goes back in.You will know the sensor is back in far enough when you can press the sensor flush against the tranny. Gasket should line up easily.I put a drop of loctite on the bolt's tip for the ones I fix at my place so the bolt won't work looseand it doesn't get overtight. -Bob

 

There is an o-ring gasket on it..lube it with some old motor oil. Just play with it trying to slide it back in at different positions (spinning it) and make sure it is straight up and down. Sooner or later it will pop in.