If i get a conversion harness for obd2 to obd1, and i need to get a new complete distributor, what type should i be looking for, one that is for an obd1? thanks guys

 

hey i just put and obd1 lsvtec in to my 2000 honda civic which is obd2. i used the obd2 harness and ecu to wirein the sensorsand shit and to control the injectors as far as the ignition i got a msd blaster ss coil pack and a msd distributor those wired in .if you use a obd1 ecu you need a jumper harnes so your best bet ie cheaper is just use the obd2

 

i didn t do the wiring i had a shop do it b/c i suck at wiring but thats what i used

 

will there be any effects at all? or will it run perfectly fine?

 

mine is running greatand by using the obd2 ecu it allows me to use my vafc

 

what motor are you swapping

 

i'm not swapping nethiong...i have a 2000 gsr, but converting my ecu from obd 2 to obd 1...but i need a new distributor and i was alittle confused on what i should be looking for cause my distributor is bad.

 

well if you are converting thewhole system ..... idont know why you would want to do that but okay . then you have to buy everything jumper harness obd1 ecu and an ignition sytem

 

you don't need to replaced the distributor i have the same setup im running obd2 distributor