ok i have a question for anybody who has done this before i barely ever get on here anymore causei t is hard to get onto a computer since ive moved out of state and i knmo this has been asked several times before i just dont have the time to search it my question is im going to be putting an h22a1 into my 95 accord ex i kno it bolts up and everything and ive been told to use my original harness but is it going to require any wiring or is it all the saME like once its all bolted up and hooked up is it going to run some one please help id rather kno wat im lookin forward to than be stuck not knowing wat to do thanks

 

it will bolt up, you use the accord harness and add the needed wires.. swap is very easy.

 

+1

this link will tell you how to wire it up
http://www.sportcompactcarweb.com/t...brid/index.html

 

bobby where are you gettin the motor? kinda nice how i only talk to my brother on tampaacing......

 

u need a prelude driverside motor mount and the metal tip off a prelude h23 or h22. the mount is expensive, i got it at the dealer. the power steering line i bought from a junkyard for 35 bucks. u gotta have the metal tip of the ps line from the prelude welded to the accord line. on the wiring u have to add the knock sensor wire which i dont know what ecu pin it is. also, u have to switch pins A6 and A11 and thats all. i did my swap myself and it is not hard at all. my accord is 94 and i know exactly what ur talking about.

 

to get the prelude mount on the accord bracket u have to pry it a little bit wider. use a pipe if a bar.

 

thanks for yhe info evryone and jay motors comin out of a junkyard up here i kno you dont believe me but youll see for your self soon enough as long as all goes well and i alredy have a prelude mount cause i owned a 92 prelude and wen i put the new motor in tyhat i had extra mounts but the only other question would be is were can get the ps line soddered thanks for the info and sorry for mnot replyin sooner it is rare that im ever on here but i kno its were i can get awnsers thanks again everyone

 

i called u bob u dident pick up.. yea well see.. come to fl u bitch

 

He will,as soon as he fixes his rollpan,JACKASSSSS

 

when i had my swap done, we didnt weld the PS line. we cut the prelude tip off and flared the tip, also flared the remaining accord PS line, put fittings on each end, and now my PS line screws on and off, and it looks much better than the welded line. i'll post pics when i get off work. you can take your car to any auto air conditioning place to get this done, since thats how they connect a/c lines.