Injector question????
Thread Starter
Registered User
Joined: May 2003
Posts: 147
Likes: 0
Injector question????
I would like to know if rx-7 460cc injectors can be used on a 94 gsr motor. im boosting so i need bigger injectors.i check the ohm reading on the injectors and there at bout 13-13.5 will that compatable for the gsr or is it to high.. If those wont fit please tell me what i can use...thanx
Guest
Posts: n/a
no you dont want to have to try and mess with those... just get some DSM 450cc... they will work out well for you and they are easy to do... the 7 injectors CAN work... but you will have to play with them for a while... for one they are a bit taller so you will have to figure a way to mount your fuel rail a bit higher... just go DSM...
-Keith
-Keith
Hello
Joined: May 2003
Posts: 2,238
Likes: 0
I'm not sure if they are going to work on your car. It all depends on if you have a resistor box making your low impedance injectors high.
since the injectors in your car are 13-15ohms seems like you would have to add a resistor box to make low impedance injectors work. And I'm not sure if that can be done. you are able to find high impedance rx7 550cc injectors easily.
that may be the easier route to go.
since the injectors in your car are 13-15ohms seems like you would have to add a resistor box to make low impedance injectors work. And I'm not sure if that can be done. you are able to find high impedance rx7 550cc injectors easily.
that may be the easier route to go.
__________________
Heavy car with a 2.5L
Heavy car with a 2.5L
