Oh geez someone help me with this.
I have no clutch pedal I crack the bleeder & pump like brakes etc. nothing happens any ideas fluid doesnt move in resivor.

 

your camaro has a small ristrictor in the clutch line from the factory you have to open the bleeder screw press down the pedal close screw then relase the pedal repeat untill fluid does not have air in it. Do not the resivor go empty you will have to do it all over again.

 

I suggest the same thing and if you have time to buy this, TICKshift.com - Quick Shifting Six Speed Perfectionists scroll to the last one, speed bleeder. You will need 2 people to do it without it, made doing my clutch much easier as its a one way valve. Just open it and stick it in a can of brake fluid and pump away.

 

my also want to check your slave cylinder to make sure that its not leaking or blown. I know on my old 240 that when it blew i had no clutch pedal and couldnt shift.

 

If no fluid is moving when you pump the clutch and crack the bleeder it sounds like the clutch master cylinder isn't working.

 

And if thats the case go to the same website I posted and buy a Tick Master cyl...