305-350 TPI Intake
Thread Starter
no more imports for me
Joined: Jan 2005
Posts: 335
Likes: 0
305-350 TPI Intake
What would I need to change to convert a 350 to TPI, using the 305 TPI parts? Do the intakes still mount differently on the heads? I was thinking just find a 350 intake, and the 305 TPI FR's and injectors should be ok right? Thanks for any help in advance.
Thread Starter
no more imports for me
Joined: Jan 2005
Posts: 335
Likes: 0
no my question was the intake itself I know older pre TPI intakes mounted to the heads differently and the bolt holes don't line up between the 305 and 350. I just wasn't positive if it was the same for TPI Engines which it is.
Guest
Posts: n/a
all I take is a grinder to make the hole longer, then fill the rest in with rtv.
It wasnt a different between the 305/350s I recall it was they went to center bolt valve cover from the perimeter bolt, they just the angle of the 2 inner intake bolts on each side.
It wasnt a different between the 305/350s I recall it was they went to center bolt valve cover from the perimeter bolt, they just the angle of the 2 inner intake bolts on each side.
