Need my drums turned
Thread Starter
drives euro trash
Joined: Jun 2000
Posts: 7,036
Likes: 0
Originally posted by Joker
try any napa, alan. they will usualy do it on spot for ya.
try any napa, alan. they will usualy do it on spot for ya.
What about vented rotors? My EBC TurdGroove rotors are pretty warped up front. Are these vented rotors still salvagable with a mill, or should I just ditch them for plain ol non-vented rotors?
__________________
Get Down-Or-Stay Down
Joined: Jun 2002
Posts: 13,363
Likes: 0
They got to check the run out on them...if they are to warped..and they cut them,then come to find out they are underspecs then they are garbage..
Guest
Posts: n/a
Alan, don't try any NAPA, try the main store on Florida and Fowler. That is where all of the machine work is done, if you take it to another store, it will ride in a van all around town, then go to the machine shop, then the reverse, take the extra little time and go to the main store, it will end up being a MUCH shorter process.
Senior Citizen
Joined: Jun 2000
Posts: 2,438
Likes: 0
Originally posted by Force Fed 23
Alan, don't try any NAPA, try the main store on Florida and Fowler. That is where all of the machine work is done, if you take it to another store, it will ride in a van all around town, then go to the machine shop, then the reverse, take the extra little time and go to the main store, it will end up being a MUCH shorter process.
Alan, don't try any NAPA, try the main store on Florida and Fowler. That is where all of the machine work is done, if you take it to another store, it will ride in a van all around town, then go to the machine shop, then the reverse, take the extra little time and go to the main store, it will end up being a MUCH shorter process.
I can vouch..remeber Alan when your brother and I worked for napa..trust me..you don't want your rotors riding around with us..hahaha
__________________
10' 1198S
09' Ninja 500R
09' Stella
10' 1198S
09' Ninja 500R
09' Stella
Get the fuck off my lawn
Joined: Oct 1983
Posts: 11,091
Likes: 0
Originally posted by Tony
I can vouch..remeber Alan when your brother and I worked for napa..trust me..you don't want your rotors riding around with us..hahaha
I can vouch..remeber Alan when your brother and I worked for napa..trust me..you don't want your rotors riding around with us..hahaha
Livin' in Seattle
Joined: Nov 2000
Posts: 2,813
Likes: 0
Originally posted by phatstang1
Thanks, I'll give them a call.
What about vented rotors? My EBC TurdGroove rotors are pretty warped up front. Are these vented rotors still salvagable with a mill, or should I just ditch them for plain ol non-vented rotors?
Thanks, I'll give them a call.
What about vented rotors? My EBC TurdGroove rotors are pretty warped up front. Are these vented rotors still salvagable with a mill, or should I just ditch them for plain ol non-vented rotors?
I don't really see the problem with turning them though I guess the lathes they use may have a problem with 'em. Some weekend I'm just going to fab up a mount and start turning my own damned rotors. Pain in the ass having to run out to Discount or Napa each time.
