General Car Chat Talk about cars in general. All makes and models - strictly car discussion.

shortening wheel width

Thread Tools
 
Old Nov 28, 2006 | 11:00 AM
  #1 (permalink)  
suprapimpa's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 2,667
Likes: 0
Default shortening wheel width

I've read about Supra owners widening their stock wheels to fit wider tires but does anyone know where to get a 22 inch wheel shortened to fit a smaller tire?
Reply
Old Nov 28, 2006 | 11:15 AM
  #2 (permalink)  
jlude90's Avatar
aspiring luder
 
Joined: Dec 2005
Posts: 7,209
Likes: 0
Default

examples?

are you wanting like a 195/17 on it???
__________________
Reply
Old Nov 28, 2006 | 11:19 AM
  #3 (permalink)  
suprapimpa's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 2,667
Likes: 0
Default

Originally Posted by jlude90
examples?

are you wanting like a 195/17 on it???
No I mean like shortening it so you can fit a 265/22 instead of a 295/22 the reason why is because when I turn it rubs the inside fenderwell.
Reply
Old Nov 28, 2006 | 11:27 AM
  #4 (permalink)  
myltwon's Avatar
Bolt-On 2v GT
 
Joined: Mar 2004
Posts: 8,713
Likes: 0
Default

yes you can cut a wheel to shorten it
__________________


"Does this look like a piece of crap to you? Like them spinnin' tires do you?"
Reply
Old Nov 28, 2006 | 11:27 AM
  #5 (permalink)  
jlude90's Avatar
aspiring luder
 
Joined: Dec 2005
Posts: 7,209
Likes: 0
Default

you don't need to shorten it, it'll just stretch, you might have to get a higher sidewall to stretch far enough, it'll be a bitch in the rain and you'll have very little protection on the rim of the wheel
__________________
Reply
Old Nov 28, 2006 | 11:28 AM
  #6 (permalink)  
jlude90's Avatar
aspiring luder
 
Joined: Dec 2005
Posts: 7,209
Likes: 0
Default

how do you cut it?

cut material out and re-weld?
__________________
Reply
Old Nov 28, 2006 | 12:36 PM
  #7 (permalink)  
Whaazup17's Avatar
Registered User
 
Joined: Apr 2003
Posts: 7,297
Likes: 0
Default

I would like to know how they cut it... How much you need to cut off about? 1/2"? or what..
Reply
Old Nov 28, 2006 | 06:42 PM
  #9 (permalink)  
suprapimpa's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 2,667
Likes: 0
Default

Originally Posted by jlude90
how do you cut it?

cut material out and re-weld?
I believe thats how they do it, but who can do it?
Reply
Old Nov 28, 2006 | 08:53 PM
  #10 (permalink)  
nismo's Avatar
BRB
 
Joined: Nov 2004
Posts: 4,009
Likes: 0
From: Tampa
Default

Do you drive a Supra on 22's?
__________________
Reply



All times are GMT -8. The time now is 02:59 AM.