?? about clear coat.
Thread Starter
is gone yuuussss!!!!
Joined: Jun 2005
Posts: 994
Likes: 0
?? about clear coat.
There is a spot of clear coat (about 1.5'' x 3'') that is gone on my tonneu cover of my truck. My question is, can i just spray some more clear coat over top of that or do i have to do any kind of sanding to get a rough surface so it will stick?
__________________
-Mike-
"You must always push the limits.
Because if you never fail you will never succeed!!" - No Fear
-Mike-
"You must always push the limits.
Because if you never fail you will never succeed!!" - No Fear
Thread Starter
is gone yuuussss!!!!
Joined: Jun 2005
Posts: 994
Likes: 0
so sand the paint then just spray over? how much paint will it take away?
__________________
-Mike-
"You must always push the limits.
Because if you never fail you will never succeed!!" - No Fear
-Mike-
"You must always push the limits.
Because if you never fail you will never succeed!!" - No Fear
weezin the juice
Joined: Mar 2004
Posts: 3,341
Likes: 0
You want to try not to remove ANY paint at all, jsut rough up the current surface. If you sand lightly and hit it right, youll only need to clear it. 1500/2000grit paper is really hard to go through anything at all with. Just rough it up moderatly with some fine fine paper and clear over that entire panel. Wet sand, forgot to mention that.
__________________
realer than most
Joined: Sep 2003
Posts: 8,806
Likes: 0
You want to try not to remove ANY paint at all, jsut rough up the current surface. If you sand lightly and hit it right, youll only need to clear it. 1500/2000grit paper is really hard to go through anything at all with. Just rough it up moderatly with some fine fine paper and clear over that entire panel. Wet sand, forgot to mention that.
im gonna have to do this soon..because of the fucker that egged my car..
