It's a mustang ricer!!!
Thread Starter
Registered User
Joined: Feb 2002
Posts: 0
Likes: 0
It's a mustang ricer!!!
I was looking at another site and came across a cheap performance mod. It was only $20 and it's APC. I think I'll sell my filter charger and do this 
__________________
CHRIS
The next time you can't find a designated driver, just park in a tow a way zone!!
CHRIS
The next time you can't find a designated driver, just park in a tow a way zone!!
Guest
Posts: n/a
I had a huge K & N on the end of my mass air meter a long time ago and it worked great ! I just had to make a adapter to fit the two together.
In the above picture I would have removed the backside of the round air filter container and made a adapter plate.
If you want to make one Chris let me know.
In the above picture I would have removed the backside of the round air filter container and made a adapter plate.
If you want to make one Chris let me know.
Red Stripe Beer!
Joined: Apr 2001
Posts: 192
Likes: 0
atleast it flows
__________________
2004 GT: STOCK
1997 GT: Mods: 180 Degree Thermostat, Flowmaster 2 Chambers, MAC O/R H Pipe, MAC Cold Air Intake w/K&N Filter, 75mm Ported Upper Intake w/ 75mm BBK Throttle Body, Screamin Demon Coils with Livewires
1997 GT: has front end damage still drives FOR SALE
AIM:OmFgStFu
2004 GT: STOCK
1997 GT: Mods: 180 Degree Thermostat, Flowmaster 2 Chambers, MAC O/R H Pipe, MAC Cold Air Intake w/K&N Filter, 75mm Ported Upper Intake w/ 75mm BBK Throttle Body, Screamin Demon Coils with Livewires
1997 GT: has front end damage still drives FOR SALE
AIM:OmFgStFu
The H N I C
Joined: May 2002
Posts: 0
Likes: 0
HAHA, that looks a lot like my 1st mod. I did that with my K&N and just got a conector from Home Depot pluming department. Hooked the MAF to the Filter, good old getter-dun enginering.
__________________
Does that look normal to you?
Does that look normal to you?
Cracka-Faced Cracka!
Joined: Jul 2001
Posts: 1,951
Likes: 0
im still lost as to wtf im looking at? a filter..attached to what?
__________________
AIM: AIMisGOOP
AIM: AIMisGOOP
Originally Posted by moldyhands
in the immortal words of the very wise Kid Rock, "3 foot tall with a 10 foot dick"
though for me, you'd have to change it to 10 inches, and you'd have to change inches to millimeters, and you'd have to change 10 to 5 and you'd have to change dick to poor excuse for one.
though for me, you'd have to change it to 10 inches, and you'd have to change inches to millimeters, and you'd have to change 10 to 5 and you'd have to change dick to poor excuse for one.
The H N I C
Joined: May 2002
Posts: 0
Likes: 0
Originally posted by "SlowLX5.0"
im still lost as to wtf im looking at? a filter..attached to what?
im still lost as to wtf im looking at? a filter..attached to what?
__________________
Does that look normal to you?
Does that look normal to you?
Thread Starter
Registered User
Joined: Feb 2002
Posts: 0
Likes: 0
Originally posted by "FordMan"
I had a huge K & N on the end of my mass air meter a long time ago and it worked great ! I just had to make a adapter to fit the two together.
In the above picture I would have removed the backside of the round air filter container and made a adapter plate.
If you want to make one Chris let me know.
I had a huge K & N on the end of my mass air meter a long time ago and it worked great ! I just had to make a adapter to fit the two together.
In the above picture I would have removed the backside of the round air filter container and made a adapter plate.
If you want to make one Chris let me know.
)
__________________
CHRIS
The next time you can't find a designated driver, just park in a tow a way zone!!
CHRIS
The next time you can't find a designated driver, just park in a tow a way zone!!
