OB1 JZA70

Alignment Components Control Arm; Front Camber/Caster
Part #: 72125
SPC Performance's 350Z & G35 kit was the first on the market to provide a substantial amount of positive camber change. Additionally, its patented design makes it the only arm on the market that provides adjustable caster. There is more than enough camber and caster change to correct cars that have been lowered, or for vehicles used in drifting. Installed by itself, the control arm provides ±1.5° of camber and ±1° of caster. If more camber is required a +2° fixed shim will provide up to +3.5° of positive camber. With this remove and replace arm, techs can fine tune both camber and caster to save tires and improve handling along with tire to surface contact. The kit includes everything you need, including the ABS sensor bracket, shims, and arms for both sides of the vehicle.
New Design Features & Benefits:
More than 20% reduction in unsprung weight
Imporved clearance for tight wheel wells & soft springs
Arm is formed from a single piece of steel rather than welded assemblies