for sale or trade 525HP 4th Generation Z06 Tran AM Ram Air
1998 Arctic White Trans Am - Ram Air - newly built Corvette Z06 Engine (cammed with ported & milled 59cc heads - flow like AFR 225"s) - I have a custom built 500+ HP Trans AM with less than 200 miles on new custom built Corvette Z06 engine & Stage III 600+HP transmission with less than 200 miles (145k on chassis - chassis, drivetrain, powertrain and suspension have ALL completely newly installed Prothane Motion Control poly bushings less than 2 months ago - so car is very tight - no rattles whatsoever) & too may new parts (over $12k just since August in performance upgrades)
Are you interested in trade? - nice lifted truck or fast tuner car
I just got car back after 5 months of being professionally built by several very well known reputable speed shops who hold world championship titles in several classes. Car was custom built front to rear for ultra high performance. The last step was completed just last week at Kesatie Motorsports in Sarasota using HP tuners (top of the line GM tuning software) , Matt is very meticulous & did about 10 pulls & spent about 6 hours tweaking it for maximum "safe'' power & efficiency. Dyno was done with car running regular pump gas, not racing fuel & it pulled so hard & fast it nearly broke the dyno (Matt can confirm this) - the wide open throttle run clocked at 174MPH before he had to back off so full power wasn’t 100% realized. I haven't run car at the track but I'd estimate 1/4 mile @ 10.7-10.8 @ 128'shmph trap speed, with slicks and batterty relocated to rear hatch compartment & passenger seat pulled, it would likely pull the front tires off the ground. Car has zero issues everything works & works VERY well. I literally had to bring the car back to the dyno after hours because the car was so loud that the neighbors in the industrial park were complaining even though Kesatie Motorsports primary line of business is performing dyno runs & tuning for high performance vehicles on their dynometer. If you have a pesky neighbor, this car with its 11:1 compression, ceramic coated long tube headers & high flow race muffler with dual polished 4" tips will be great to improve your relationship with them
Before backing off; car dyno’d at 435rwhp estimated engine HP is approximately 510-525HP, more importantly rwtq was 440, so it pulls like a beast & shouldn’t have issues EASILY beating 2010 Camaro’s by a WIDE margin as well as Supercharged Cobra's and can even hold its own if not beat $100k Supercharged Shelby Mustang KR 500’s.
Let me know if you’re interested in a possible trade, car is worth $15k but in this economy cash is king and I'd prefer to trade if someone is interested in this very fast & well built Trans Am.
Thanks,
Tom Sullivan
call or text 941-822-2015
Are you interested in trade? - nice lifted truck or fast tuner car
I just got car back after 5 months of being professionally built by several very well known reputable speed shops who hold world championship titles in several classes. Car was custom built front to rear for ultra high performance. The last step was completed just last week at Kesatie Motorsports in Sarasota using HP tuners (top of the line GM tuning software) , Matt is very meticulous & did about 10 pulls & spent about 6 hours tweaking it for maximum "safe'' power & efficiency. Dyno was done with car running regular pump gas, not racing fuel & it pulled so hard & fast it nearly broke the dyno (Matt can confirm this) - the wide open throttle run clocked at 174MPH before he had to back off so full power wasn’t 100% realized. I haven't run car at the track but I'd estimate 1/4 mile @ 10.7-10.8 @ 128'shmph trap speed, with slicks and batterty relocated to rear hatch compartment & passenger seat pulled, it would likely pull the front tires off the ground. Car has zero issues everything works & works VERY well. I literally had to bring the car back to the dyno after hours because the car was so loud that the neighbors in the industrial park were complaining even though Kesatie Motorsports primary line of business is performing dyno runs & tuning for high performance vehicles on their dynometer. If you have a pesky neighbor, this car with its 11:1 compression, ceramic coated long tube headers & high flow race muffler with dual polished 4" tips will be great to improve your relationship with them
Before backing off; car dyno’d at 435rwhp estimated engine HP is approximately 510-525HP, more importantly rwtq was 440, so it pulls like a beast & shouldn’t have issues EASILY beating 2010 Camaro’s by a WIDE margin as well as Supercharged Cobra's and can even hold its own if not beat $100k Supercharged Shelby Mustang KR 500’s.
Let me know if you’re interested in a possible trade, car is worth $15k but in this economy cash is king and I'd prefer to trade if someone is interested in this very fast & well built Trans Am.
Thanks,
Tom Sullivan
call or text 941-822-2015
Last edited by bossho; Nov 28, 2010 at 11:02 AM.


