2001 turbocharged v-6 mustang for sale 400wheel horse power $7,500
Thread Starter
gofast
Joined: Aug 2010
Posts: 3
Likes: 0
2001 turbocharged v-6 mustang for sale 400wheel horse power $7,500
this is a swet ride i puts out a little over 400 horse power.. dyno proven.. it has pretty much every thing..it is extremely fast and pretty mush destroys everything you line it up against. it has full weight reduction and alot of fun. it runs and drives like a stock v-6 but when you get on it its a beast. pretty much the ultimate sleeper..see pics of the build at gofastracing.net.
ENGINE: stock 3.8l v6 with 11psi of boost and a cam. precision turbo 61mm with a custome turbo kit from go fast racing. kit is built with all good materials a stainless steel hot side and aluminum cold side. it has a tial blow off valve and tial waste gate with a big front mount intercooler.tuned by efi unlimited runs and drives great. turbo kit cost $4600. you can see pic's of the build at gofastracing.net
REAR: 8.8 with 3:73 gears. fully built about 3 months ago. all new bearings outer and inner and the diff was repacked with ford motorsports clutches. tubular controol arms and eibach lowering springs and aluminum drive shaft.
INTERIOR: a set of $900 corbeau seats pass and driver. and a rear seat deleat from bmr . the rest is pretty much stock with a few billet knobs. it is verry clean inside
this car has pretty much everything you will want and with a built motor has the possability of making around 600horse
I can get you some pics if you want them.
ENGINE: stock 3.8l v6 with 11psi of boost and a cam. precision turbo 61mm with a custome turbo kit from go fast racing. kit is built with all good materials a stainless steel hot side and aluminum cold side. it has a tial blow off valve and tial waste gate with a big front mount intercooler.tuned by efi unlimited runs and drives great. turbo kit cost $4600. you can see pic's of the build at gofastracing.net
REAR: 8.8 with 3:73 gears. fully built about 3 months ago. all new bearings outer and inner and the diff was repacked with ford motorsports clutches. tubular controol arms and eibach lowering springs and aluminum drive shaft.
INTERIOR: a set of $900 corbeau seats pass and driver. and a rear seat deleat from bmr . the rest is pretty much stock with a few billet knobs. it is verry clean inside
this car has pretty much everything you will want and with a built motor has the possability of making around 600horse
I can get you some pics if you want them.
dabeetereater
Joined: Jul 2006
Posts: 1,481
Likes: 0
Pics!!!!!!!!
__________________
EuroRat #2+#3
"YEA THOUGH I ROLL THROUGH THE VALLEY OF THE SHADOW OF RICE, I WILL FEAR NO TURBO FOR DISPLACEMENT AND TORQUE ART WITH ME... MY RODS AND MY PISTONS THEY COMFORT ME.."
bought not broken!!!
member #2
"having a big turbo is like having a big dick; it's not immediately obvious to everyone, but you have to just rest assured that when it comes time to put it to use, you won't need to explain a whole lot afterwards"
EuroRat #2+#3
"YEA THOUGH I ROLL THROUGH THE VALLEY OF THE SHADOW OF RICE, I WILL FEAR NO TURBO FOR DISPLACEMENT AND TORQUE ART WITH ME... MY RODS AND MY PISTONS THEY COMFORT ME.."
bought not broken!!!
member #2
"having a big turbo is like having a big dick; it's not immediately obvious to everyone, but you have to just rest assured that when it comes time to put it to use, you won't need to explain a whole lot afterwards"
