Dyno & Build: Toyota Supra

Thread Tools
 
Old Jul 21, 2010 | 04:07 PM
  #1 (permalink)  
Alpha's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 9,270
Likes: 0
Default Dyno & Build: Toyota Supra

Thanks to Denny, Gabby and Victor for getting this done

We installed and provided AEM EMS V2, AEM UEGO wideband wired into AEM EMS, AEM boost gauge, AEM boost control solenoid and tuned it

Car: Toyota Supra (JSpec)

Motor: Stock 2JZ-GTE (JSpec)

Fuel: Pump 93

Mods: Stock bottom end, stock head, 3" downpipe, 3" mid pipe, HKS 4" exhaust, AEM EMS V2 tuned by Alpha

Notes: This was on stock JSpec twins. We had to install a restrictor in the exhaust to keep the boost down at 15lbs. Otherwise it would run too much boost for the stock JSpec injectors and turbos. No timing adjustments were made to increase power. Injector duty cycle was at 87%. Customer will be back for many many more upgrades

__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site

* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Reply




All times are GMT -8. The time now is 03:30 PM.