2.4 ka single cam complete running engine
about to take out of my 91 hardbody,runs great,no sludge or knocks,always changed oil on time,owned vehicle since new.can hear run till tuesday 7/6/10,complete with intake,all accesories,alt,starter,injectors,new water pump,comes with pacesetter longtube header for pickups and auto trans(trans needs rebuilt,only has 1st and reverse)$350obo
also fits the following vehicles:
1989–1990 Nissan 240SX
1990–1997 Nissan Hardbody Truck
1990-1995 Nissan Pathfinder
1989–1992 Nissan Axxess
1990–1992 Nissan Stanza
will also have complete harness,and ecm also avalible seperately
update:
pulled engine out this week,took a video of motor running and reving while in truck.
also fits the following vehicles:
1989–1990 Nissan 240SX
1990–1997 Nissan Hardbody Truck
1990-1995 Nissan Pathfinder
1989–1992 Nissan Axxess
1990–1992 Nissan Stanza
will also have complete harness,and ecm also avalible seperately
update:
pulled engine out this week,took a video of motor running and reving while in truck.
__________________
88 mustang hatch
holley 650dp carb,175 shot nos,3g alt,underdrive pulleys,strut tower brace,tko trans,bbk x-pipe,2 chamb. flows,jet coated shortys,urethane mounts,tri-ax shifter,moroso 7 qt pan,msd wires,sumped fuel tank,twin holley blue pumps,alum.driveshaft,axle brace,billet bearing caps,tru-trac diff,fms gears,solid pinion spacer,moser axles,smog pump delete,msd 6al,cobra brakes,roller thrust plate,f cam,stealth intake,ported track heat heads,lots of other crap i cant remember.
88 mustang hatch
holley 650dp carb,175 shot nos,3g alt,underdrive pulleys,strut tower brace,tko trans,bbk x-pipe,2 chamb. flows,jet coated shortys,urethane mounts,tri-ax shifter,moroso 7 qt pan,msd wires,sumped fuel tank,twin holley blue pumps,alum.driveshaft,axle brace,billet bearing caps,tru-trac diff,fms gears,solid pinion spacer,moser axles,smog pump delete,msd 6al,cobra brakes,roller thrust plate,f cam,stealth intake,ported track heat heads,lots of other crap i cant remember.
Last edited by fox3streetracer; Aug 15, 2010 at 07:00 PM.
u-pull it yard gets $300(including $50 core)for a junk engine u will have to pull yourself,prob have to re-build and prob aint gonna hear it run.
__________________
88 mustang hatch
holley 650dp carb,175 shot nos,3g alt,underdrive pulleys,strut tower brace,tko trans,bbk x-pipe,2 chamb. flows,jet coated shortys,urethane mounts,tri-ax shifter,moroso 7 qt pan,msd wires,sumped fuel tank,twin holley blue pumps,alum.driveshaft,axle brace,billet bearing caps,tru-trac diff,fms gears,solid pinion spacer,moser axles,smog pump delete,msd 6al,cobra brakes,roller thrust plate,f cam,stealth intake,ported track heat heads,lots of other crap i cant remember.
88 mustang hatch
holley 650dp carb,175 shot nos,3g alt,underdrive pulleys,strut tower brace,tko trans,bbk x-pipe,2 chamb. flows,jet coated shortys,urethane mounts,tri-ax shifter,moroso 7 qt pan,msd wires,sumped fuel tank,twin holley blue pumps,alum.driveshaft,axle brace,billet bearing caps,tru-trac diff,fms gears,solid pinion spacer,moser axles,smog pump delete,msd 6al,cobra brakes,roller thrust plate,f cam,stealth intake,ported track heat heads,lots of other crap i cant remember.
but GLWS
bump for you.
__________________
Tops Optional
Tops Optional
cophers clearwater,st pete,big 3 u-pull it,all of them get between $260-300 with core for complete engines with acessories
__________________
88 mustang hatch
holley 650dp carb,175 shot nos,3g alt,underdrive pulleys,strut tower brace,tko trans,bbk x-pipe,2 chamb. flows,jet coated shortys,urethane mounts,tri-ax shifter,moroso 7 qt pan,msd wires,sumped fuel tank,twin holley blue pumps,alum.driveshaft,axle brace,billet bearing caps,tru-trac diff,fms gears,solid pinion spacer,moser axles,smog pump delete,msd 6al,cobra brakes,roller thrust plate,f cam,stealth intake,ported track heat heads,lots of other crap i cant remember.
88 mustang hatch
holley 650dp carb,175 shot nos,3g alt,underdrive pulleys,strut tower brace,tko trans,bbk x-pipe,2 chamb. flows,jet coated shortys,urethane mounts,tri-ax shifter,moroso 7 qt pan,msd wires,sumped fuel tank,twin holley blue pumps,alum.driveshaft,axle brace,billet bearing caps,tru-trac diff,fms gears,solid pinion spacer,moser axles,smog pump delete,msd 6al,cobra brakes,roller thrust plate,f cam,stealth intake,ported track heat heads,lots of other crap i cant remember.
i'll offer 150 lmk
i'm in Ocala an can pick up.
i'm in Ocala an can pick up.
__________________

^ Pass was done on Nitrous no wheelie bars.2nd Gear
This Starlet Is The True Definition Of Old Skool | tunermaneuvermag.com
G54B swapped 1982 Toyota Starlet Motor Built and tuned by Flaco Tech, Orlando Fl
6.501 1/8mile stock block stock head Ebay Turbo 50 trim no nitrous.
BIG #'s on a graph dont mean shit,
its the SMALLER ones on the slip

^ Pass was done on Nitrous no wheelie bars.2nd Gear
This Starlet Is The True Definition Of Old Skool | tunermaneuvermag.com
G54B swapped 1982 Toyota Starlet Motor Built and tuned by Flaco Tech, Orlando Fl
6.501 1/8mile stock block stock head Ebay Turbo 50 trim no nitrous.
BIG #'s on a graph dont mean shit,
its the SMALLER ones on the slip
Last edited by Kelvin Racing; Jul 9, 2010 at 11:44 AM.
I'll match that an i'm local so I can pick up whenever
__________________

^ Pass was done on Nitrous no wheelie bars.2nd Gear
This Starlet Is The True Definition Of Old Skool | tunermaneuvermag.com
G54B swapped 1982 Toyota Starlet Motor Built and tuned by Flaco Tech, Orlando Fl
6.501 1/8mile stock block stock head Ebay Turbo 50 trim no nitrous.
BIG #'s on a graph dont mean shit,
its the SMALLER ones on the slip

^ Pass was done on Nitrous no wheelie bars.2nd Gear
This Starlet Is The True Definition Of Old Skool | tunermaneuvermag.com
G54B swapped 1982 Toyota Starlet Motor Built and tuned by Flaco Tech, Orlando Fl
6.501 1/8mile stock block stock head Ebay Turbo 50 trim no nitrous.
BIG #'s on a graph dont mean shit,
its the SMALLER ones on the slip




