97 Civic EX Coupe project
Picked up the car January 23rd, 2010. I have a lot of plans and the car is starting from completely stock and automatic. Interior is a 10/10 and exterior is a 9/10 so its a good start...
This is what we are starting off with platform wise:

Engine bay before:

Day 1:
washed the car
degreased the engine bay
removed the "CIVIC" and "EX" badges from the rear
removed the factory Honda sun roof visor
using a buffer I applied paint restore to get any dirt out before waxing
used plastic renew on the headlights
wiped it down and waxed it

Day 2:
replaced stock speakers with Polk DB951's
replaced stock head unit with a Sony CDX
added some sound dampening to rear wheel well
ran amp wiring

Day 3/4:
Removed the interior pieces and removed the window tint

Day 5/6/7:
Re-did the engine harness for a tuck
Original location for the main harness

Almost done

New location for the wiring right below the heater core lines

Day 8:
Burned out old bushings

Day 9:
Removed the auto dash to swap the manual wiring + dash so theres no need to cut and splice any wires

Day 10:
Headlight harness tucking

Day 11:
All the fluids drained
Unbolted everything besides the top 3 mounts, preparing for the D pulling
Removed the axle nuts
Day 12:
Pulled the D
Removed stock exhaust


Day 13:
Cleaned the engine bay

Day 14:
Finished the headlight harness wire tuck

This is what we are starting off with platform wise:

Engine bay before:

Day 1:
washed the car
degreased the engine bay
removed the "CIVIC" and "EX" badges from the rear
removed the factory Honda sun roof visor
using a buffer I applied paint restore to get any dirt out before waxing
used plastic renew on the headlights
wiped it down and waxed it

Day 2:
replaced stock speakers with Polk DB951's
replaced stock head unit with a Sony CDX
added some sound dampening to rear wheel well
ran amp wiring

Day 3/4:
Removed the interior pieces and removed the window tint

Day 5/6/7:
Re-did the engine harness for a tuck
Original location for the main harness

Almost done

New location for the wiring right below the heater core lines

Day 8:
Burned out old bushings

Day 9:
Removed the auto dash to swap the manual wiring + dash so theres no need to cut and splice any wires

Day 10:
Headlight harness tucking

Day 11:
All the fluids drained
Unbolted everything besides the top 3 mounts, preparing for the D pulling
Removed the axle nuts
Day 12:
Pulled the D
Removed stock exhaust


Day 13:
Cleaned the engine bay

Day 14:
Finished the headlight harness wire tuck

__________________
Honda builds go from yay to gay in the matter of a K.
Honda builds go from yay to gay in the matter of a K.
Last edited by FoxHondaRider; Apr 4, 2010 at 07:15 PM. Reason: Updates
u wanna sell the damged civic in the backround lmk?
__________________
[SIGPIC][/SIGPIC]
97dc2 -sold
94dc2-sold
94db8
-sold
02rsx base model-sold
97ek built b16a-SOLD
02 built rsx type s-sold
02 rsx type s!-my daily! <3-sold </3
04 nissan 350z-blown up in 2 hrs since bought lol!-who gives a fuck!
97 ek beast!-DD-soldddd
2001 s2000-daily- my baby! <3
who cleaner than me!
YANK KREW MEMBER!#7
"I love Asian chocha" crew member #004
I LOVE SERBIAN/BOSNIAN CHOCHA CREW MEMBER #1
[SIGPIC][/SIGPIC]
97dc2 -sold
94dc2-sold
94db8
02rsx base model-sold
97ek built b16a-SOLD
02 built rsx type s-sold
02 rsx type s!-my daily! <3-sold </3
04 nissan 350z-blown up in 2 hrs since bought lol!-who gives a fuck!
97 ek beast!-DD-soldddd
2001 s2000-daily- my baby! <3
who cleaner than me!
YANK KREW MEMBER!#7
"I love Asian chocha" crew member #004
I LOVE SERBIAN/BOSNIAN CHOCHA CREW MEMBER #1
Its been long over due for some updates lol Sorry guys, got it covered up to the latest stuff. More updates for tomorrow I hope.
I can never update by day lol so heres the past few days added. Check them out. BTW I just keep adding onto the 1st post


