FS: obd-1 engine harness
Thread Starter
Registered User
Joined: May 2004
Posts: 3,478
Likes: 0
FS: obd-1 engine harness
GONE GONE GONE GONE
from a 93 DX, everything is perfect except the dizzy plugs were cut off. (i can prolly supply the plugs if you need em and for a few extra bucks i will solder and heatshrink wrap them) this can be slightly modded to fit b-series vtec or non-vtec. if its vtec then you have to pin 3 wires.
i live in clearwater by the bayside bridge and work in st pete by the gandy and howard franklin bridges
$20 obo come and get it, or its going in the trash. if you need some plugs i will part them off for some change.
from a 93 DX, everything is perfect except the dizzy plugs were cut off. (i can prolly supply the plugs if you need em and for a few extra bucks i will solder and heatshrink wrap them) this can be slightly modded to fit b-series vtec or non-vtec. if its vtec then you have to pin 3 wires.
i live in clearwater by the bayside bridge and work in st pete by the gandy and howard franklin bridges
$20 obo come and get it, or its going in the trash. if you need some plugs i will part them off for some change.
__________________
"Black people can't be racist" - Some black guy.
"Black people can't be racist" - Some black guy.
Last edited by freakasis; Nov 9, 2008 at 05:51 PM.
