FS: Moates BURN1 Flash-n-Burn USB-Based Chip Programmer
Thread Starter
Registered User
Joined: Sep 2001
Posts: 2,540
Likes: 0
FS: Moates BURN1 Flash-n-Burn USB-Based Chip Programmer
This will allow you to modify your own ECU chips (EPROMs) assuming that you have the appropriate software. $50
Retail is $85
Directly from the Moates site:
USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Comes with stand-alone chip programming software (available for download). Also compatible with TunerPro RT. Will read most stock-style chips (2732A, 27C128/256/512/etc).
used but works great. $50
Call Dave at 813-389-3358 if u want it
Click below for picture:
Retail is $85
Directly from the Moates site:
USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Comes with stand-alone chip programming software (available for download). Also compatible with TunerPro RT. Will read most stock-style chips (2732A, 27C128/256/512/etc).
used but works great. $50
Call Dave at 813-389-3358 if u want it
Click below for picture:
Last edited by 99B16Si; Feb 21, 2007 at 05:22 AM.
